X-Cart forums

[vladimir.gritsenko]

Originally Posted by espresso

We installed the December release.

In our case, on the manufacturer page, it shows the " choose a Categories" but no filters. Once you select a category, the filters are displayed.

This worked on an older version. We uploaded the new files (December release) over the old version on our dev site. On the dev site the filter shows up on the manufacturers page including the categories. May be some files are missing on the latest release. I think the filters shouldn't show up for our case, so an option in the config settings would be welcome.

The Ajax (dynamic filtering) on the products list is not working for us. The entire page reloads instead. We use CDSEO Pro from WebsiteCM. May be CDSEO is forcing a reload ? Jon, if you are monitoring may be you have a solution ?

The Ajax on the Manufacturers page causes a greyed out box over the products_list template on IE, Mozilla, Chrome and safari. It only worked on the iPad as expected.

The QTY's available are not shown on Yes/No radio buttons.

There is no reset button available on the manufacturers Categories selection.

It seems the installation was not performed properly. I recommend you to conact our technical support for assistance.

[vladimir.gritsenko]

Originally Posted by whitesunglass

Another feature that's really needed is color grouping.
For example, if the products have all sort of blue colors like sky blue, navy blue, dark blue, blue, etc, we don't want to show all of them in the color section of the filter, otherwise it would have hundreds of color blocks showing. We only want to show the major colors (Black, Gray, Red, Blue, Green, Yellow, etc..).
The module should allow grouping these colors to a general "Blue" and when the end user clicks on the "Blue" filter, it should show all the products that have associated blues.
This is crucial for stores that has lots of products.

It's not a default feature but it may be easily added within a custom modification. Feel free to contact our sales.

[vladimir.gritsenko]

Originally Posted by Freakmode

If we install the new version will it preserve all of the existing filters that have been setup?

If you uninstall then install the module, all the existing settings will be lost. However, if you perform a manual upgrade of the module files and DB, all should be fine.

Originally Posted by Freakmode

What is the correct procedure for a module upgrade?

The procedure is as follows:

1. Find the package you installed.
2. Download the lates package.
3. Make the files and DB diff.
4. Apply the difference to files and DB. In case of files changes, you may just overwrite the old files with the newer ones while DB diff may require some expertise.

Feel free to contact our support if you need assisance.

[Freakmode]

Thanks.

There is only 1 line on the database about showing on the homepage so it upgraded fine.

[vladimir.gritsenko]

Originally Posted by Freakmode

Thanks.

There is only 1 line on the database about showing on the homepage so it upgraded fine.

I am glad you succeeded.

[Freakmode]

OK, please can you tell me how to get this to show on the home page.

I have enabled the "Home Page" option in the admin menu but nothing shows up, works fine on all of the other category pages.

Also enabled "All Categories (home page)" from the Filter setup, still nothing shows.

[vladimir.gritsenko]

Originally Posted by Freakmode

OK, please can you tell me how to get this to show on the home page.

I have enabled the "Home Page" option in the admin menu but nothing shows up, works fine on all of the other category pages.

Also enabled "All Categories (home page)" from the Filter setup, still nothing shows.

Seems not all the files was patched. There is a couple of new entry points which are going to be released in v4.6.2. Apparently they were not added to code when you updated the module files. Please contact our technical support for assistance.

[xtech]

Hello,
What is exactly change? can you provide me a screenshots what exactly changed in new version?

Thanks.

[vladimir.gritsenko]

Originally Posted by xtech

Hello,
What is exactly change? can you provide me a screenshots what exactly changed in new version?

Thanks.

I am not sure what change you meand but ib any case it would be better to contact our technical support with this question. They would be glad to assist.

[Freakmode]

Originally Posted by vladimir.gritsenko

Seems not all the files was patched. There is a couple of new entry points which are going to be released in v4.6.2. Apparently they were not added to code when you updated the module files. Please contact our technical support for assistance.

I did

Here is there genius reply!

X-Cart can be customized to meet your needs.

I would also like to suggest ordering our custom development services - our developers will implement the necessary code modifications in your X-Cart store. If you are interested, feel free to create a quote request in your Helpdesk area, or just let me know and I will ask our project managers to estimate the customization for you.

Read more about our services at
http://www.x-cart.com/services.html

Thank you,
Eugene